Avantone Pro CV95 – Multi-Pattern Tube Condenser Microphone

The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CV-95 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to well known mics of similar series...but at a fraction of their cost!

Our rugged CV-95 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformer coupled tube circuitry will yield pleasing professional results comparable to much more expensive designs.

The CV-95 houses a 25mm gold-sputtered 6 micron Mylar capsule. The CV-95 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of "upgrade" components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CV-95 as a vocal mic or utility condenser due to its versatility...It exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The classically designed CV-95 mic is able to produce professional results with a clean sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 9 patterns allow the CV-95 to be used in a variety of situations.

• <> Type: Tube-Type True Condenser
• <> Polar Pattern(s): 9 Patterns selectable at PS-1BV Power Supply
• <> Capsule: Dual-sided 25mm diaphragm (32mm outside diameter) center-terminated gold-sputtered Mylar (6 micron)
• <> Frequency Response: 20-20,000Hz +/- 3dB
• <> Output Impedance: <=250 Ohms / transformer isolated
• <> Sensitivity: -38dB
• <> S/N Ratio: 78dB
• <> Noise Floor: < 17 dBA
• <> Maximum SPL: 130dB (0.5% THD @ 1000Hz)
• <> Equivalent Noise Level: 18dB (A weighted EC651)
• <> Output Connector: Male XLR 7 pin with special PS-1BV Power Supply and cables
• <> High-Pass Switch: 80 Hz 6dB/octave
• <> Attenuation Switch: -10 dB
• <> Power Requirement: Dedicated PS-1BV Power Supply, 115/230VAC selectable
• <> Included Accessories:
• <> Wood Box
• <> Shockmount
• <> 7-pin cable
• <> Metal Road Case
• <> PS-1BV Power Supply
• <> Foam Wind Screen
• <> Dimensions: 237mm x 46mm
• <> Weight: 1.8 lb
• <> Finish: Polished Nickel trim / Metallic Cabernet Red Body