Audix ADX20I – Wireless Component Condenser Instrument Microphone

The ADX20i miniature condenser microphone is applicable for professional stage and studio applications. This microphone is primarily used for miking most reed and brass instruments.

The ADX20i has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances.

The ADX20i condenser instrument microphone is lightweight, compact, and simple to use. Included with the ADX20i is a gooseneck clip with spring tension for easy mounting to the bell of an instrument.

• <> Transducer Type Pre-Polarized Condenser
• <> Frequency Response 40 Hz – 20 kHz
• <> Polar Pattern Cardioid
• <> Output Impedance 250 ohms
• <> Sensitivity Cardioid – 6 mV / Pa @ 1k Hypercardioid – 5.6 mV / Pa @1k
• <> Equivalent Noise Level <29 dB (A-weighted)
• <> Signal to Noise Ratio >65 dB
• <> Maximum SPL =135 dB
• <> Power Requirements 9-52 V phantom
• <> Connector Shielded 6’ terminating to a miniature 3 pin XLRf
• <> Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
• <> Materials / Finish Machined Brass Capsule / Black Finish
• <> Weight 48 g / 1.7 oz
• <> Length 29 mm / 1.14 in