Audix ADX18 – 18" Miniature Gooseneck Cardioid Condenser Microphone, Black

The ADX12 & ADX18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings, and teleconferencing.

With a uniformly controlled cardioid polar pattern, the ADX12 & ADX18 helps isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control.

The ADX12 and ADX18 are designed with an integrated preamp circuitry built into the base of the XLR. They can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit the microphone holder.

• <> Cardioid 18? podium microphone with flexible gooseneck at both the base and the top of the shaft. Requires 18-52 V phantom power.
• <> Transducer Type Pre-Polarized Condenser
• <> Frequency Response 40 Hz – 18 kHz
• <> Polar Pattern Cardioid/Hypercardiod
• <> Output Impedance 150 ohms
• <> Sensitivity 24 mV (C) / Pa @ 1k 30 mV (HC) / Pa @ 1k
• <> Equivalent Noise Level 28 dB (A weighted)
• <> Signal to Noise Ratio 66 dB
• <> Maximum SPL =120 dB
• <> Power Requirements 18 – 52 Volts phantom
• <> Connector 3-pin XLRm
• <> Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• <> Materials / Finish Machined Aluminum / Black Finish
• <> Weight 113 g / 4 oz (ADX12) 159 g / 5.6 oz (ADX18)
• <> Length 403 mm / 16 in (ADX12) 558 mm / 22 in (ADX18)