Sontronics STC1-SET-BL – Matched Stereo Pair of Small-Diaphragm Condenser Microphones, Black

The Sontronics STC-1S in black is a matched stereo pair of small-diaphragm condenser microphones for detailed stereo recording. Both microphones feature Sontronics' smooth high-end roll-off and standard cardioid pickup, with optional omnidirectional and hypercardioid capsules available separately. Recommended applications include acoustic guitar and other solo instruments, percussion, overheads, ensembles, choirs and stereo setups.

Each microphone provides 0, -10 and -20 dB pad settings and linear, 75 Hz and 150 Hz filter settings. A 25 Hz to 20 kHz frequency response, 20 mV/Pa sensitivity and 137 dB maximum SPL support a range of sources. Each microphone uses a 3-pin XLR connector and requires 48 V phantom power.

• Matched stereo pair of two small-diaphragm condenser microphones in black


• Cardioid pickup with optional omnidirectional and hypercardioid capsules available separately


• Smooth high-end roll-off for clear, detailed stereo recordings


• Recommended for acoustic instruments, percussion, overheads, ensembles and choirs


• Each mic has 0/-10/-20 dB pad settings and linear/75/150 Hz filter settings


• Frequency response: 25 Hz to 20 kHz per microphone


• Maximum SPL: 137 dB at 0.5% THD, 1 kHz per microphone


• Sensitivity: 20 mV/Pa; equivalent noise level: 16 dB (A-weighted) per microphone


• 3-pin XLR connector on each microphone; 48 V phantom power required

• Matched stereo pair of two small-diaphragm condenser microphones in black
• Cardioid pickup with optional omnidirectional and hypercardioid capsules available separately
• Smooth high-end roll-off for clear, detailed stereo recordings
• Recommended for acoustic instruments, percussion, overheads, ensembles and choirs
• Each mic has 0/-10/-20 dB pad settings and linear/75/150 Hz filter settings
• Frequency response: 25 Hz to 20 kHz per microphone
• Maximum SPL: 137 dB at 0.5% THD, 1 kHz per microphone
• Sensitivity: 20 mV/Pa; equivalent noise level: 16 dB (A-weighted) per microphone
• 3-pin XLR connector on each microphone; 48 V phantom power required