HK Audio LINEAR-9-110-XA – 700-Watt 10" Active Monitor

The dispersion angle of each speaker’s horn is optimised for its intended use. The LINEAR 9 110 XA 10" speaker is equipped with an 80° x 60° wide dispersion horn for homogeneous near-field dispersion. It can be rigged either via the rigging points (steel cables or chains in combination with the AP-8 attachment point) or with the TB-28N tilt bracket.

• <>Max. SPL @ 10% THD: 126 dB half space (70 Hz – 12 kHz averaged)
• <>Max. SPL peak @ 10 % THD: 129 dB half space
• <>Frequency response +/-3 dB: 70 Hz – 19 kHz
• <>Frequency response -10 dB: 65 Hz – 20 kHz
• <>Power amp output (RMS): 700 W
• <>Amp type: Class D - biamped
• <>LF driver: N/A
• <>Low-/mid speaker: 1x 10", 2.5" voice coil
• <>HF driver: 1", 1.4" voice coil
• <>Horn directivity: 80° x 60° CD horn, rotatable
• <>Active crossover frequency: 2 kHz FIR X-over with 60 dB/oct.
• <>Maximum input level: +20 dBu
• <>Analog inputs: 1x XLR combo balanced
• <>Analog thru: 1x XLR balanced
• <>DSP Out: 1x XLR balanced
• <>Network port: Ethercon RJ45, 1x In, 1x Thru
• <>Filter presets: Flat, Monitor, Low Cut, Remote
• <>Remote software: DSP CONTROL (Windows, macOS)
• <>DSP functions: Fully parametric 10-band EQ with variable filter characteristics, High-Pass Filter, Low-Pass Filter, Polarity, Level, Delay, Limiter, Mute
• <>Sample rate: 96 kHz
• <>System latency: Less than 2.6 ms
• <>Mains connector: 1x Powercon NAC3 In, 1x Powercon NAC3 Thru, 100–240 V
• <>Power consuption: 1 A / 100–240 V nominal according to EN 62368-1
• <>Clustering angle: N/A
• <>Angles up (Monitor angle): 30°
• <>Pole mount: DuoTilt 3°/7°
• <>Rigging points: 5x M8 (AP-8)
• <>Carrying handles: 2x SingleGrip
• <>Housing: Birch multiplex
• <>Finish: PU coating black
• <>Front grille: 2 mm metal grille backed with black acoustic foam
• <>Dimensions (WxHxD): 36 x 54 x 31 cm 14-11/64 x 21-1/4 x 12-13/64"
• <>Weight: 16.5 kg / 36.4 lbs