HK Audio FINEO-FO-10-WHT – 600-Watt 10" Install Speaker. White

If you’re looking for compact dimensions and balanced sound with crystal-clear HF and expressiveness in the mid and lower frequency ranges without compromise, the FO"10 is a perfect choice. The combination of a 10" woofer with a 1.75" voice coil and the rotatable constant directivity horn from the CONTOUR X series, which was developed for the rough and tumble of touring, with a powerful 1" compression driver, results in an assertive full-range solution for speech and music. With a dispersion angle of 80° x 60°, the horn can be rotated by 90°, allowing the speaker to be used upright, lying on its side or suspended on its side with optimum dispersion in any situation. The FO"10 is an assertive system speaker that works perfectly with the S118 or S218 subwoofers, delivering rich and precise mids.

• <>Concept Passive 2-way mid/high unit
• <>Cabinet principle Bass reflex
• <>Power handling RMS 300 W
• <>Power handling program 600 W
• <>Power handling peak 1200 W
• <>Nominal impedance (According to EN 60268-5 (minimum value not less than 80% of nominal value)) 8 ohms
• <>Max. SPL average (1 m, 10 % THD @ 80 Hz - 20 kHz, (EN 60268-21), full space): 119 dB
• <>Max. SPL peak (1 m, 10 % THD @ 1.3 kHz, full space): 123 dB
• <>Sensitivity 1 W/1 m (80 Hz - 20 kHz, full space): 91 dB
• <>Crossover frequency: 2.9 kHz
• <>Frequency range -6 dB: 71 Hz - 20 kHz
• <>Frequency range -10 dB: 67 Hz - 20 kHz
• <>Dispersion angle -6 dB (horizontal x vertical): 80° x 60°
• <>Ball impact resistance (DIN 18032-3): certified (MPA University Stuttgart)
• <>IP protection class (EN 60529): not specified
• <>Low-/mid frequency: 1x 10" Sica cone speaker with ferrite magnet and 2" voice coil
• <>High frequency: 1 x 1" Sica compression driver with ferrite magnet and 1" voice coil
• <>Crossover: High pass: 18 dB/octave, low pass: 18 dB/octave
• <>High frequency protection circuit: Self-healing PTC fuse
• <>Horn: BEM-optimized constant directivity horn, rotatable
• <>Input: 1 x NL4 Speakon
• <>Output/parallel output: 1 x NL4 Speakon
• <>Pin assignment: 1+/- (input/parallel output), 2+/- (wired through)
• <>Lab.Gruppen: IPX
• <>LEA Professional: Sharkware
• <>Filter specifications in tabular form for frequency response equalization Without limiter specifications: Biamp Tesira BSS Lab.gruppen Lake Linea Research Marani Powersoft QSC Q-SYS Symetrix
• <>Mounting points: 2 x M8 lateral, 2 x M8 bottom/lid, 1 x M8 rear, 4 x M4 rear
• <>Cabinet material: MDF
• <>Cabinet surface: 1-component acrylic enamel
• <>Color: Jet black (RAL 9005), signal white (RAL 9003) or special color according to catalog
• <>Front grille: Steel front grille with anticorrosive coating, backed acoustic foam and additional steel reinforcements
• <>Optional accessories: U-bracket, screw-on flange SF-35, swivel and tilt wall mount (size S for VESA MIS-D, 100 x 100 mm), AP-8
• <>Rear hole p