Kinman - Surf-Jag Bridge

Kinman pickups for Jaguar are direct replacements and no modification to the guitar is required. 

Some people will call these noiseless Jaguar pickups but Kinman prefers to describe them correctly as Zero-Hum Jaguar pickups.  That's because there are 2 types of noise, Hum which is cancelled in the pickup and Buzz which can only be minimized by shielding the wiring cavities (refer to >Technical >Perfect Guitar >Shielding for newer guitars

** Alnico-K is a unique proprietary rod magnet developed by Kinman in 1985.  It is Alnico-5 but has 40% less string pull than Alnico-5 so sustain is longer and there is much less clatter from string crash and no Strat-itis string warble.

* Fender, Strat, Jaguar and Jag are registered Trade Marks of Fender Musical Instrument Corp, Inc.  Kinman is not associated with FMIC but they kindly permit us to refer to their Trade Marks to describe our products.

Number of parts in this pickup: 31
Number of parts in regular single coil: 11
Number of parts in other brand noiseless: There are no other noiseless Jaguar pickups with Alnico rod magnets.  Kinman is the only one and that makes it the coolest Jaguar pickup available.

Laser engraved nomenclature so you can't forget.

Pickup adjustment

As with all Kinman Gen-2 pickups these are very sensitive to height adjustment.  A good starting point, so the neck and bridge pickups balance, is with the two E strings fretted at the 15th fret, adjusted as follows ...

• bridge pickup so the string-to-magnet gap is 1.25mm for both E strings
• neck pickup so the string-to-magnet gap is 1.5mm for both E strings

Connection means that are available

• Bare wires for soldering.
• Kinman connectors for plugging into any Kinman Goodbye-Soldering Harness.  We do not make harness for Jaguar.

Hook-up wires

• 3 single wires is standard.  Allows for phase reversing and series connection.  Cut generously longer than necessary for the 2 pickup positions.
• Single non-shielded wires require shielding in the cavities that carry wiring to prevent electrical buzz.  See >Technical >Perfect Guitar >Shielding for newer guitars
• We use Fenders color codes.

Output Polarity: 

• in-phase with all other Kinman pickups (compatible)
• in-phase with Gibson and Copy humbuckers (compatible)
• opposite phase to Fender Strat etc (compatibility requires phase reversal of either pickup)

Pot & Capacitor values

• Recommended 250k Ohm Volume pot (measured).  Thinner sound with 500k or 1Meg for volume & Tone.
• It's easy to change the pot in the main circuit, it's difficult to find the smaller one in the separate upper circuit for the neck pickup. 
• Tone pot is usually the same value as the volume.  A little more top end brightness from 500k, 1meg or a No-Load.
• Normal tone cap value of 0.022μF in 63 ~ 100 volt.  Smaller values lessen the severity of Treble cut.

Magnet spreads (E-1st ~ E-6th)

• A mix of two of the following that provide optimum string-over-magnet alignment
• Standard 52.5mm
• Intermediate 51mm
• Narrow 49.5mm
• Indicate the bridge saddle spread in the Ordering Process so we know which ones you need.

Magnet Staggers

• Normal improved Stagger to suit 7 ~ 14 inch uniform radius fretboards including USA Custom Guitar Compound 7-1/4' ~ 9-1/2
• Flat Stagger for specific compound radius fretboards (Warmoth 10 ~ 16 inch and Post 2010 Fender Deluxe 9 ~ 14')
• Option to specify the magnet stagger in our 'After-Order Additional Questions' email we send you.

Mounting hardware included

• 2 of our specially made improved mounting screws.
• 2 Silicon Rubber tube springs are included.
• Kinman one one-piece special non-magnetic Claw that is fixed to the pickup.

Covers

• We now have our own Jaguar covers.  Beautifully crafted with no sharp edges, and fits any and all pickguard openings without modification
• White, Parchment, Ivory, Aged White, genuine Cream and Black.
• Optional de-glosssing for an old look.
• With and without the Kinman logo.