Kinman - Humbucker PAF ASTOUND

Technical & Application info:

	The Baseplate is Laser engraved with all Identity info

The bridge pickup in the P.A.F Suite.  Weapon of choice for Tone connoisseurs.

Direct replacement for conventional humbuckers such as Gibson, Duncan etc.  Some guitars (a few Ibanez, some Fender Strat and one or two others) have pickups with excessively rounded corners.  If a pickguard is fitted (for example Fender Strat Deluxe) a small modification to the pickguard opening to accommodate a Kinman humbucker is well worth the effort since Kinman's sound so much better.  The cavity in the body is suitable as it is.

NEWS Flash 15-Dec-2020 - Now available with 47.5mm pole spread that suits the neck position prefectly on Gibson's and and other guitars that have a narrow 52mm spaced bridge.  This has been made possible with our CLCT (Coil Length Compensation Technology) that restores the performance that is lost when poles are spaced closer together.

Hook-up cable

• Standard is 2 conductor shielded
• Not recommended but can be split so 3 conductor hook-up cable is optional upon request. See Converge-3 ultimate splitting models.
• Phase reversing can also be done with 3 conductor hook-up cable.
• Not recommended but 4 conductor cabling for Series, Parallel and Coil Splitting upon request at additional cost.
• Neck 380mm / 15' long -and- Bridge 150mm /6' long for bridge.

Connection means available

• Bare wire ends for soldering.
• Kinman connectors for plugging into any Kinman Goodbye-Soldering Harness.- including the 2 pickup KHP-90 harness for Gibson style guitars.
• Gibson 2 wire and 5 wire Quick Connect plug for Gibson harness.

Output Polarity: 

• in-phase with Gibson and Copy humbuckers
• in-phase with all other Kinman pickups
• opposite phase to Fender Strat
• ESSC versions can not be phase reversed and must be specially ordered as such.

Pot & Capacitor values

• Best with 500k Ohm for Volume & Tone.  Many Gibson's have 300k and that works fine too as does 250k.
• Normal tone cap value of 0.022µF in 63 ~ 100 volt Polyester.  Smaller value lessen the severity of Treble cut, higher values increase it.

Pole spreads

that provide optimum string-over-pole alignment.  Our Ordering System automatically allocates the correct pole spacing according to the bridge spacing you indicate.

• where the bridge saddle spacing is a standard Gibson 52mm (or less than 54mm for some other brands).
  • 47.5mm for neck position
  • 50mm for bridge position
• where the bridge saddle spacing on a Stratocaster is 56.4mm (vintage 6 point bridge)
  • 50mm for neck position
  • 53mm for bridge position

Mounting options

• conventional 2 screw mounting,
• also available with 3 screw mounting (you specify the distance between the two top screws)

Covers and colors

• Open top Natural Nickel-Silver, highly recommended and have zero impact on sonic performance
• Closed top Natural Nickel-Silver, have low impact on sonic performance 
• Electro real Gold plating on closed top covers does impact on treble frequencies.
• Various colored top plates are available for open top covers (Black, Cream, White and 6 different Pearloid colors) with clear, scratch resistant protector plate.
• Kinman humbuckers are engineered differently without molded butyrate plastic bobbins.  Removing covers will not reveal bobbins and we advise against it.